Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In

UFIT Wiki

:

Mac OS Leopard Wireless Manual Configuration

Wireless Manual Configuration – Mac OS Leopard
 
Configuring Mac OS 10.5 Leopard for UF WPA 2 wireless
  • Give the profile a name, for example UF wireless network. Then enter the following information:
Osleoparddot1x.jpg
  • From the Menu bar, select the Apple icon, and then System Preferences.
  • In the Internet & Network section, select Network.
  • From the Network window, select Airport on the left side and then the Advanced button near the bottom.
  • From the menu at the top select 802.1X.
  • Click the + in the lower left corner and select the choice Add User Profile.
  • Give the profile a name, for example UF wireless network.
  • Select OK to close the profile window.
  • Select Apply on the Network window to save the changes.
  • To use the network just configured, make sure it is selected from the Network Name selections.

If you have not connected to this network before you may need to setup trust for the certificate.
 
You should now be able to access the 'uf' wireless network. When prompted for login info you should use your Gatorlink userid and password to login. If you checked the box in the Security section to remember your credentials then this will happen automatically each time you connect after the initial successful connection attempt. Note that the credentials will have to be re-entered each time you change your password.
 
 
Return to the Main FAQ page.

 
 Last modified at 7/10/2013 2:59 PM by Varvorines, Drake