Skip Ribbon Commands
Skip to main content
Navigate Up
Sign In

UFIT Wiki

:

ConvertingRecordstoCD

Last modified at 8/23/2012 12:46 PM by Manasse,Dalyns

Converting Records to CD

1. In order to start converting a record to CD, make sure the record's size is compatible with our record player, either 33 RPM or 45 RPM as shown on the Numark record player will work. Next, open Audacity from the main menu.

2. When Audacity opens, select Edit > Preferences, and change the recording device to Delta 1010LT 3/4 as shown below.

Image:Record1.jpg


3. Next, you will need to power on the Numark record player on the top right of the player. When ready, load the record onto the middle of the turntable.

4. You will now need to place the needle on the outer edge of the record, and press the Start/Stop button in the lower left corner of the Numark record player.

5. Now in Audacity, press the Record icon in order to begin recording the audio as shown below. When the first side of the record is finished recording, click the Stop icon.

Image:Buttons.jpg


6. You can then click the Play icon to listen to your recording.

7. If your recording sounds very low or is hard to hear, you may increase the  Gain as shown below in order to increase the volume of your recording. In addition, make sure that the volume of your headset is on, but not excessively low or high in order to better judge the volume of your recording.

Image:Gain.jpg


8. A slightly more complicated way of increasing the volume, is by amplifying the wavelength. First, left click and drag over the portion you would like to amplify (or press CTRL + A to select the entire track). Then, go to Effect > Amplify and the window shown below will appear. Click Preview to test the volume of the selected portion, you can drag the bar in order to increase or decrease the volume. When you are finished, click OK.

Image:Amplify.jpg

The desired result of using amplify is shown below.

Image:Amplify2.jpg

9. However, if you do not like your recording all together, simply click the X to the left of Audio Track as shown below, and repeat the previous steps.

Image:Closing.jpg


7. After you are done recording, if you need help to edit the existing audio recording, please refer here.


Otherwise, you may export as an Ogg, WAV, or MP3 file format depending on your needs as shown below.

Image:Export.jpg



Back